ACIS (.sat)
Adobe Acrobat 3DPDF (.pdf)
ANVIL (.step)
AutoCAD 2D (.dxf)
AutoCAD 3D (.step)
CADKey 3D (.step)
CATIA V4 (.igs)
CATIA V5 (.igs)
DXF recordsdata (.dxf)
eDrawing (.easm/.eprt)
IGES (.igs)
IronCAD (.step)
Inventor (.step)
Mechanical Desktop (.step)
Professional/E Part/Meeting (.prt)
SDRC I-DEAS (.step)
Solidworks eDrawings (.dxf)
Solidworks Part/Asm 2005+ (.prt)
Solidworks Half/Asm 2004 (.step)
STEP (.step)
Unigraphics (.step)
Skid steer loaders with high stream hydraulic systems require high circulation quick couplings to meet fluid management requirements. Many typical skid steer machines function with normal hydraulic test kit circulate which varies from 8 to 23 gallons per minute to energy most skid steer attachments. Flat face hydraulic couplers are mostly used on skid steer loaders.
1) SeaStar Helm pumps are fitted with a in-built test valve that are required for installations of additional steering stations and/or autopilot pumps. If your helm pump is not fitted with an inside check valve an exterior valve will be required.
2) Autopilot mfg. requires the amount of your steering cylinder(s) to offer an satisfactory autopilot pump, refer to web page 12-2 for cylinder specs.
Stucchi is acknowledged for offering hydraulic fast couplers which deliver durable, dependable and safe connections for practically 60 years. We provide flat face, threaded flat face, poppet interchange, threaded poppet interchange couplers, multi-coupling plates, test valves and equipment and fast connect solutions underneath high strain. Our engineers excel at course of analysis and custom options which meet your specifications.
When we plan to do on-load check (annual inspection or 5-12 months inspection), the R7 Lifers lifts up lifeboat by hydraulic energy to take over lifeboat weight. Then turn the examine-valve to make a part of hydraulic back to cylinder, the lifeboat weight is again to release hook. After the discharge handle is pulled, the lifeboat is launch down with strong dynamic loading, in the intervening time the cylinder would absorb the shock loading by half compressed air and half non-compressed hydraulic to keep the lifeboat protected.