I have a nasty hydraulic leak from the manifold (guessing at the identify) that hooks as much as the FEL. Yesterday I hosed the crud off the tractor, and that i parked it overnight with a clean sheet of newspaper under it. No less than an ounce of oil leaked out. I’m importing a photo. There are two fast couplers on the rear of the manifold-kind factor. It appears that the one on the precise is leaking. Because there isn’t any oil on the physique of the coupler, I believe the issue is with the threads under it.
Uffex, I understand exactly what you are saying, the pdf file was useful also. We perceive about including the attachments effects the load at the top. We should do some calculating to see what the machine will comfortably handle. Guess we had been just pondering that the machine was capable of dealing with the attachments which are made for it. If this is actually the issue (that it tips because we added the attachments), then I would have hoped Kubota/vendor would have specs showing what the machine is capable of having added attachments to it, and which attachments are okay to add. If the machine can’t handle the attachments made for, pressure test point then to me that may be a design flaw.
Our seller even sold us CLASS 5 buckets (which makes the issue ALOT worse).
Gates® LOL Plus. “Petroleum-base hydraulic oils, water, glycol antifreeze options, hot lubricating oils, and air. . . . not advisable for pressure surge functions or critical applications, comparable to permanent piping in residential or commercial buildings. Not really useful for gasoline or diesel fuels. . . . Temperature Vary: -Forty °F to +212 °F (-forty °C +100°C). For air: 160 °F (+71 °C) only . . . Tube: Black, oil resistant synthetic rubber highly resistant to oil and heat . . . Reinforcement: One fiber braid. . . . Cowl: Oil- and abrasion-resistant synthetic rubber. Obtainable in black-Neoprene (LOLA), . . . ” Gates Hydraulic Catalog, 2002 ed. pp. 27. Use push on fittings can be found. Minimal orders apply: 300 ft (ft) reel for 3/16 inch. 50 ft & 300 ft length for 1/4 inch to 1/2 inch sizes. 50 ft & 250 ft length for 5/eight inch to 3/4 inch hose sizes. See Gates fuel line hoses, in case you are searching for gasoline and diesel purposes. Up to date: March 2004.