Pressure Gauging Locations
All hydraulic fluid power programs could at some time require troubleshooting, and an important first step in troubleshooting is to take strain measurements in numerous elements of the circuit. When constructing the system, a little forethought in offering gauge points will save numerous time and trouble if troubleshooting should be required.
Fittings and flanges are required in nearly each installation job as an intermediate joint between the pump, valve or actuator port to another part in the system. A simple cylinder circuit may require SAE Code sixty one flanges at the pump to join its ports to the suction and pressure hoses. The stress hose might then terminate at the directional valve, where it makes use of a JIC to NPT adapter to hitch the hose to said valve. Lastly, NPT to JIC adapters at the work ports would possibly feed hoses to a cylinder employing SAE O-Ring boss ports fitted with 90° JIC to ORB adapters. Hydraulic fittings and flanges are simply unavoidable.
We’re a stocking distributor of RYCO hose products from 1/4″ 2 wire as much as 2″ six wire hose and fittings. This enables us to fit each hose earlier than it is installed on your tools for a neat and skilled looking finish with a world quality product. Stocking 1000’s of hydraulic seals in normal and metric allows us to reseal cylinders quickly and effectively, many the same day, most inside 24 hrs. For those larger than average cylinders, our cylinder desk has over 30,000 ft-lbs of torque and potential to clamp onto a 10″ nut. Now we have had prospects struggle larger piston nuts for days with a number of men working on it solely to deliver it to us to interrupt free in 15minutes.